Universal starter table, color Blue

Universal starter table, blue color

• Valid and adaptable to start 1:10 and 1:8 scale nitro cars, without the need for a starter handle.
• Metal pinion motor
• Has the motor in position for use with most 1:8 buggies
• Available in blue color.
• It is driven by a powerful 740 brush motor.
• It has three easily interchangeable positions where to put the friction wheel depending on where the flywheel of your car is. As standard, the rubber wheel is installed as in the photos, which is the most common.
• The flywheel is an aluminum wheel that carries the engine and underneath there is a slot in the car's chassis to be able to connect the rubber wheel of the starter table.
• Very resistant anodized aluminum metal case.
• Magnetized, so as not to lose the metal accessories.
• The ways to power this table are:

1. Connecting it to a 12v car or motorcycle battery, the table includes connectors but not electrical clamps for connection to the terminals.

two. Two equal rechargeable batteries in series of NICD or NIMH 7.2v from about 2000mAh to 3000mAh of power with Tamiya connector. The table includes the serial connector for it.

3. Two equal rechargeable batteries in series of LIPO 7.4v of about 3000mAh and above with Tamiya connector. The table includes the connectors for it.

4. A 14.8v LIPO rechargeable battery of about 3000mAh and above with a Tamiya connector. The table includes the connectors for it.

5. A rechargeable Gel lead battery 12v 3000mAh onwards.