SKY RC Power Switch

SKYRC introduces POWER SWITCH, a tiny MCU controlled on/off switch for your radio controlled model. A simple button activates the switch to eliminate the problems associated with the intermittent contact of an ordinary mechanical switch. The sealed unit is plastic and can be easily mounted to your model's transponder mount or anywhere else you can mount it with double-sided tape. (Two kinds of bottom covers are included, user can change the bottom cover.) The switch also features a LiPo mode. Upon power up, the switching unit will automatically detect low LiPo voltage and cut power to protect your LiPo from excessive distortion. charging . This can of course be turned off if you have other protections in place or if you use a NiMH/NiCad battery. Additionally, the power switch informs you of the remaining capacity and condition of your battery pack.

ON / OFF SETTINGS


1. NiMH/NiCad battery


To turn on, press and hold the button for one second. The PWR LED will light up. To turn it off, press and hold the button until all LEDs turn off. The PWR LED also shows the remaining battery capacity when powered on.

TURN ON SWITCH OFF SWITCH REMAINING BATTERY CAPACITY

Press and hold for 1 second Press and hold until the LED turns off

2. LiPo battery pack


To turn on, press and hold the button for more than three seconds. The PWR LED and LIPO LED will light up. To turn it off, press and hold the button until all LEDs turn off. The PWR LED also shows the remaining battery capacity when powered on.

                        TURN ON SWITCH OFF SWITCH REMAINING BATTERY CAPACITY

Press and hold Press and hold until the LED turns off

more than 3 seconds

Specs:

• Input voltage: 4-12V
• Max. Current: 10 amps
• Battery mode:

1.NiHM/NiCad

2. LiPo

• Low voltage protection: 6.2V (LiPo)
• Operating temperature: 0-50℃
• Weight: ≤7g