Charger D100 V2 SKY RC

SkyRC D100 v2 is a dual channel charger with two independent circuits that can charge 2 batteries of various types (LiPo / LiHV / LiFe / LiIon / NiMH / NiCd / Pb) simultaneously. It is capable of working as a power supply with a maximum output of 100 watts that helps hobbyists to power DC equipment. With its unprecedented voice-guided menu function, even a novice can use this charger without any hindrance. The 11-language mobile app comes with the useful "Scan to Go" feature.

Power distribution:

The charger supports power distribution between CHA/CHB and PSU within 100W total power in AC mode.

LiHV mode can charge the new generation of LiPo batteries with a maximum voltage of 4.35 V.

Charge your batteries two at a time and in the configuration you want.

It has Bluetooth 4.0 allowing the user to control the D100 v2 comfortably through an application on a portable device such as a smartphone, iPad or iPhone. The iOS app can be downloaded from the iTunes Store and the Android app from the Google Play Store. The operation of the application is intuitive. Explicit pairing is not required.

After downloading and installing, simply turn on Bluetooth on your mobile device and the app opens. D100 v2 and your device will establish the Bluetooth connection automatically.

Download the software at the following link:

ChargeMaster_V3.04_171211

Thanks to the SCAN TO GO system you can configure independent charging parameters for each of your batteries.

Once you have saved your battery parameters, use the Sky Charger app to create a QR code and print it, then paste it on your battery.

Then simply read the QR code from the mobile application to start the previously configured upload or download.

Its 13.8 volt DC output allows you to power various auxiliary devices.

• DC power supply
• LiHV mode available
• Re- Peak mode for NiMH / NiCd battery
• Two channels charge two different types of batteries simultaneously

Specs:

• AC input voltage: AC mains input voltage 100-240V
• DC input voltage: DC input voltage 11-18V
• Load power:

  AC 100W(Support power distribution)

  DC100Wx2

• Discharge Watts: 10Wx2
• Charging power: (0.1A-10.0A) x2
• Discharge power: (0.1A-2.0A) x2
• Direct current (DC) power supply output: 13.8V / Max. 100W
• Balancing current: 300mA/cell
• Trickle charge current: 50mA-300mA & OFF
• LiPo/LiFe/Lilon/LiHV batteries: 1-6S
• NiMH/NiCd batteries: 1-15S:
• Lead-acid batteries voltage: 2-20V

Measures:

Length：140mm

Width：153mm

Height：67mm

Items included in the box:

Charger D100 V2

Power cable for alternating current

Two XH Balancing Adapter

Two charging cables with banana plugs and XT60 connector

Two charging cables with high quality bananas and tinned cable ends