DUO charger for the most demanding
1x200w – 1x100w
It also has a 60w soldering iron outlet
SKYRC D200 is a dual output charger, which supports power distribution with AC source. It has new features such as Terminal Voltage Control (TVC), Battery Meter and Battery Internal Resistance Meter.
It has software protection, such as current limit, capacity limit, temperature threshold, and charging time limit. It supports PC control and firmware upgrade.
SKYRC D200 allows you to charge two different battery packs simultaneously LiPo/LiFe/Lilon/NiMH/NiCd
by connecting an external power supply the maximum power is extended to 300W (200w+100W)
Also, it has a built-in soldering iron which can heat up to 450℃ with heavy duty 60W, the temperature is adjustable from 200-450℃
It incorporates a support to support the soldering iron
SKYRC D200 allows you to charge two different battery packs at the same time.
With AC source, if you set the maximum output power of channel A xW, then that of channel B will be yW (y = 200-x).
SKYRC D200 can charge/discharge 4.35V LiHV battery.
Power: 60W, Temperature Range: 200-450℃ (392-842℉)
Spare soldering tips: pencil tip × 1 piece
chisel point × 1 piece
User can monitor total battery voltage, individual cell voltage, etc., and view real-time data and related specification graphs during charging/discharging. Also user can use 'Charge Master' to upgrade firmware.
- Input voltage: AC100-240V / DC 11-20V
- Load power:
- DC input: 200W+100W
- AC input: 200W (distributable between each output)
- Discharge power: 2×10W
- Load range: 0.1-1.0A , 1.1A-20A
- Discharge Range: 0.1-5A
- Balancing port discharge capacity: Max 300mA/element
- 1-6S charging for LiPo/LiFe/Lilon type batteries
- 1-15S charge for NiMH/NiCd type batteries
- Soldering iron 60w temperature 200º-450º
- Pb type battery voltage: 2-24V
- Dimensions: 180 x 165 x 72mm
- Weight: 1260g